AVerMedia Technologies none - Manual (Page 2)

Installing WDM driver for Windows ME/XP
1. In Add New Hardware Wizard dialog box, choose Automatic search for a
better driver (Recommended). Click Next.
2. Select the one with <CD-ROM drive>:\DRIVER\WIN..\....then click OK.
3. Click Finish. The Audio, Tuner and Crossbar portion of the installation
will continue. The screens that you will encounter are exactly the same
as the screens in video capture installation.
4. The AVerMedia TV Series dialog box will prompt you to key-in the product key
number. In the text box, type the product key then click OK.
Installing WDM driver For Windows 2000
1. The Found New Hardware Wizard dialog box will appear. Click Next.
2. Select Search for a suitable driver for my device (recommended). Click
Next.
3. Select CD-ROM drives. Place the Installation CD into your CD-ROM drive.
Click Next.
4. The wizard now detects the correct driver. Click Next.
5. Ignore the warning message. Click Yes to install the rest of the file.
6. Click Finish. The Audio, Tuner and Crossbar portion of the installation will
continue. The installation screens will be identical to the video capture installation
program.
7. The AVerMedia TV Series dialog box will prompt you to key-in the product key
number. In the text box, type the product key then click OK.
Installing WDM driver For Windows 98SE(second edition)
You must have your Windows 98SE and the AVerMedia TV Series installation CD nearby.
1. The Add New Hardware Wizard dialog box will appear. Click Next.
2. Select Search for the best driver for your device
(Recommended). Click Next.
3. Select CD-ROM drive. Place the AVerMedia TV Series installation CD
into your CD-ROM drive. Click Next.
4. You’ll be prompted to insert the AVerMedia Bt878 WDM Driver Disk
click OK. In the next dialog box, at the Copy files from text box, type:
<CD-ROM drive>:\Driver \Win98SE.
5. If the required files are in your windows directory, the following steps
are not needed.
When prompted, insert the MS Windows98SE installation CD into your CD-ROM drive.
Click OK. In the next dialog box, type: <CD-ROM drive>:\Win98 then click OK.
6. Click Finish. The Audio, Tuner and Crossbar portion of the installation will
continue. The installation screens will be identical to the video capture
installation program.
7. The AVerMedia TV Series dialog box will prompt you to key-in the product key
number. In the text box, type the product key then click OK.
Installing VxD driver For Windows 98/95
1. The Add New Hardware Wizard dialog box will appear. Click Next.
2. Select Search for the best driver for your device
(Recommended). Click Next.
3. Select Specify a location then type: <CD-ROM drive>:\Driver
\Win98. Place the Installation CD into your CD-ROM drive then click
Next.
4. Click Finish. Windows 98 will then proceed to install the audio
capture driver. The screens that you will encounter are exactly the
same as the screens in video capture installation.
5. The AVerMedia TV Series dialog box will prompt you to key-in the product key
number. In the text box, type the product key then click OK.
For Windows NT 4.0
To install the drivers and utility software:
1. Insert
the Installation CD into your CD-ROM drive and type:
Your CD-ROM Drive:\NT40\Disk1\Setup.exe
2. A Welcome dialog box will first appear. Click Next.
3. The next dialog box shows a list of system requirements. If your PC does not meet any
of listed requirements, stop the installation and properly upgrade your PC.
If your computer is already properly equipped, click Yes and continue with the
installation.
4. The Select Country dialog box will then appear. Choose the name of your
country from this dialog box.
If the name of your country is not listed, choose any country which uses the same
TV system as yours. Based on your selection, the installation program will
automatically set which TV system the card would receive.
5. The destination folder in which the utility software will be installed is displayed
in the Choose Destination Location dialog box.
If you want to specify your own folder, click Browse and enter a pathname.
Click Next.
6. Next, specify the program folder in which to place the utility software.
Then,
click Next.
7. At this point, setup is complete.
3 4