Operating sub woofer – Aiwa SX-AVR30 User Manual

Page 7

Advertising
background image

En

ENGLISH

7

OPERATING SUB WOOFER

POWER: Turns the power on and off.

VOLUME: Adjusts the volume of the sub woofer.
- The volume level should be balanced with that of all other

channels.

- If the sound is distorted, turn VOLUME down on the sub woofer

or lower the sub woofer level on the receiver.

- To avoid overloading the sub woofer, do not set the volume of

the receiver so high that the sound becomes distorted.

AUTO POWER: Switches AUTO POWER function on and off.
When the function is set to ON:
- The power is automatically turned off and the unit enters the

standby mode when receiving no signals for about 12 minutes.

- The power is automatically turned on when receiving the signal

input again.

If the level of the signal input is low, the sound may be cut or the
unit may not turn on again by this function.

TURN OVER: Adjusts the output sound range between "300 Hz
and under" and "40 Hz and under".
Turning it clockwise changes the output sound range wider and
reproduces comparatively high frequency sound as well.
Adjust it to suit your preference and a playback source.

NOTE

After using, press POWER to turn off the power.
If the sub woofer will not be used for a long time, unplug the AC
cord from the outlet.

AUTO POWER

TURN OVER

POWER

VOLUME

Advertising