Additional information, Precautions, Playing tracks repeatedly – Sony CDX-52RF User Manual

Page 7: Changing the output level

Advertising
background image

7

EN

Actual total number:

Sony CDX-52RF (E, S, C) 3-856-013-32 (1)

CD Changer/Additional Information

Additional
Information

Precautions

If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the system
to cool off before operating it.

If no power is being supplied to the system,
check the connections first. If everything is in
order, check the fuse.

Avoid installing the CD changer, wireless
remote, and wired remote in places:
— subject to temperatures exceeding 55 °C.
— subject to direct sunlight.
— near heat sources (such as heaters).
— exposed to rain or moisture.
— exposed to excessive dust or dirt.
— subject to excessive vibration.

If you have any questions or problems

concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.

00 0

3

CD

LEVEL

=:

0

1

CD

LEVEL

+:

00 00

4

CD

LEVEL

Playing tracks repeatedly

— Repeat Play

You can select:
• REP 1 to repeat the track.
• REP 2 to repeat the disc.

Press (REPEAT) or (REP) repeatedly until
the desired setting appears (REP 1 or REP
2).

n

REP 1 n REP 2 n Cancel (REP off)

Repeat play starts.

To go back to the normal playback mode, press
(REP) until “REP” disappears.

Changing the output level

You can select the output level from the CD
changer. Normally the system is used in the
initial output level, change the level if
necessary.

1

Press (REP) for two seconds.

2

Press (REP) momentarily.

Initial setting

3

Press either the left or right side of
(AMS) to select the output level.

To decrease the output level

To increase the output level

4

Press (REP) for two seconds.

Advertising