Sony VPL-CX70 User Manual

Page 47

Advertising
background image

47

GB

Troubleshooting

Oth

e

rs

Sound

Remote Commander/Presentation tool

The picture is not clear.

• Picture is out of focus.

c Adjust the focus (see page 24).

• Condensation has occurred on the lens.

c Leave the projector for about two hours with the power on.

The image extends beyond
the screen.

• The APA key is pressed although there are black edges around the

image.
c Display the full image on the screen and press the APA key.
c Adjust “Shift” in the INPUT SETTING menu properly (see

page 33).

The picture flickers.

• “Dot Phase” in the INPUT SETTING menu has not been adjusted

properly.
c Adjust “Dot Phase” in the INPUT SETTING menu properly

(see page 33).

Symptom

Cause and Remedy

No sound.

• Cable is disconnected or the connections are wrong.

c Check that the proper connections have been made (see page

20).

• The audio connecting cable is incorrect.

c Use a no-resistance stereo audio cable (see page 20).

• The sound is muted.

c Press the AUDIO MUTING key to release the audio muting (see

page 16).

• The sound is not adjusted properly.

c Adjust the sound with the VOLUME +/– key on the Remote

Commander or adjust “Volume” in the PICTURE SETTING
menu (see page 32).

Symptom

Cause and Remedy

The Remote Commander
does not work.

• The Remote Commander batteries are dead.

c Replace with new batteries (see page 17).

• The COMMAND ON/OFF switch is set to OFF.

c Set to ON.

• The PJ/NETWORK selector switch is set to NETWORK.

c Set to PJ.

The computer cannot be
controlled with the Remote
Commander.

• The USB cable is not connected.

c Connect the projector to the computer using the USB cable.

• You are operating the Air Shot (VPL-CX75 only).

c When using the Air Shot, the computer cannot be controlled

with the Remote Commander.

The computer cannot be
controlled with the
presentation tool (VPL-
CX75 only).

• The USB cable is used.
• The Air Shot is not used.

c The presentation tool is designed to use with the Air Shot.

Use the Remote Commander to operate the device connected via
the USB cable.

Symptom

Cause and Remedy

Advertising