Sony ZS-2000 - Manual (Page 28)

The Timer 28 GB
1
When the power is off, press TIME SIGNAL to
display “TIME SIGNAL” indication.
Do the following operations by checking the
display.
2
Press TUNE•TIME SET + or – until the sound you
want appears in the display, and press DISPLAY•
ENTER MEM.
Display Intervals
Wall Clock Sounds on the hour the number of times
corresponding to the hour and again on the
half hour once (Example: Three times at
3:00 and again at 3:30 once).
Harp Sounds on the hour once
Music Box Sounds on the hour once
Chime Sounds on the hour once
Organ Sounds on the hour once
3
Press TUNE•TIME SET + or – to set the volume
you want, and press DISPLAY•ENTER MEM.
Setting the time
signal
When the power is off, you can hear the
time signal on this player. You can select
the sound for the time signal. Make sure
you have set the clock (see page 4 or 26).
TIME SIGNAL
Note
The time signal does
not sound when the
player is turned on.
TUNE
TIME SET –, +
DISPLAY
ENTER MEM
Display