Aiwa XD-DV380U - Manual (Page 20)

20
ENGLISH
AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)
Still (Pause)
Press a during playback.
To return to normal playback
Press c .
Frame Advance
Press a during pause.
Each time you press the button, the program advances one
frame. There is no audio during Frame Advance playback.
To return to normal playback
Press c .
Resuming playback
The unit remembers the point where you stopped the disc
and you can resume playback from that point.
Press c in stop mode.
To clear the resume point
Press s again after you stop the disc.
The resume point is also cleared when you press z OPEN/
CLOSE to open the disc tray, or POWER to turn the power
off.
NOTE
During Video CD playback with PBC turned on, the resume
function does not work.
To resume playback from the point where you stopped, turn
off the PBC.
When the menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
Use the i / k / j / l buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TOP MENU or MENU to return to the menu screen.
Use the number buttons to select the track you want to
view.
Press
v RETURN to return to the menu screen.
Menu settings and the exact operating procedures for using
the menu may differ depending on the disc. Follow the
instructions on each menu screen.
Tip
The unit can switch on/off the PBC (Playback control)
function in the setup menu. When PBC is turned off, Video
CD is played back the same as an audio CD. To turn off
PBC, see “CHANGING SETUP VALUE” on page 38.
To stop playback
Press s .
To turn the power off
Press POWER. The unit enters power standby mode and
the
6 STANDBY/ON indicator turns red.
If the unit is left for 8 minutes without any
operations
The unit automatically enters standby mode.
NOTE
The disc continues to spin while the menu screen is
displayed even if
s is pressed. When you are finished
using the unit, turn the power off after pressing s .
PLAYBACK (CONTINUED)