Sony DEV-3 - Manual (Page 19)

1
GB
G
etting star
ted
Charging the battery pack using
the AC Adaptor/Charger (DEV-5K)
The AC Adaptor/Charger can charge the
battery pack faster than charging it with
this product.
 Set the mode switch on the AC
Adaptor/Charger to CHARGE.
 Connect the power cord (mains
lead) to the AC Adaptor/Charger.
 Connect the power cord (mains
lead) to a wall outlet (wall socket).
 Attach the battery pack to the AC
Adaptor/Charger by sliding it in
the direction of the arrow.
The CHARGE lamp lights up and
charging starts.
When charging is complete, the battery
mark is displayed ( ).
If you continue to charge the battery
after normal charging is complete until
the battery mark shows “FULL,” the
battery pack can be used slightly longer
than when in the normal charged state.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Charging with this product
Battery pack Charging time
NP-FV70 195
NP-FV100 390
Charging with AC Adaptor/Charger
(supplied with DEV-5K)
Battery pack
Charging
time
(NORMAL)
Charging
time
(FULL)
NP-FV70 70 130
NP-FV100 125 185
The charging times shown in the table above
are measured when charging this product
at a temperature of 25  C (77 °F). It is
recommended that you charge the battery in
a temperature range of 10  C to 30  C (50 °F
to 86 °F).
Tips
See page 44 on recording and playing time.
When this product is on, you can check the
approximate amount of remaining battery
power (expected recording and playing time)
with the remaining battery indicator at the
upper right on the screen.




To the wall outlet
(wall socket)
Power cord (mains
lead)
Mode switch
CHARGE lamp