AllerAir AirCarbon Cab Protector - Manual

This specially-designed air purifier was created
specifically to be mounted on the back of an
enclosed cab forklift or truck.
Unique to AllerAir's
design, the AirCarbon Cab Protector contains 12 pounds of
activated Carbon to filter dangerous chemicals and odors in the
air. The Carbon blend can be customized upon order to remove
specific chemicals from the air.
As recommended by the Occupational Safety and Health
Administration (OSHA), a HEPA filter can be used to minimize the
exposure to dangerous airborne particles found in an industrial
setting, such as lead dust. The AirCarbon Cab Protector contains
a medical-grade HEPA filter that is 99.97% effective at filtering
particles as small as 0.3 microns. By using positive-pressure, it is
ensured that the only air that enters the cab is air that passes
through all of the filters in the model.
AirCarbon Cab Protector
FILTERS
Refillable Carbon Canister 12 lbs.
Hepa Filter 55 x 18"
12 Volt DC
300 CFM @ 0.378 static 12.65Amps.
260 CFM @ 0.888 static 11.85Amps.
230 CFM @ 1.20 static 11.10Amps.
12" x 26"
Mounts on the rear or top of an
enclosed-cabin forklift
Contains 12 pounds of
activated Carbon to remove
odors and chemicals
Customizable carbon blend
specific chemical environments
Uses an OSHA-recommended
Medical-Grade HEPA filter and
positive-pressure design
Toll free: 1-888-852-8247 Fax: 1-877-688-2193 www.allerair.com
Documents on PDF/Sales Sheets/Forklif _unit/Nov 3, 2006
CLEAN AIR
3" FLEX HOSE
16
"
CLEAN AIR
12"
3" FLEX HOSE
AIR PURIFIER