Sony RM-XM10B User Manual
Marine remote commander, Rm-xm10, Specifications
Operating Instructions
Sony Corporation
2001
Printed in Korea
RM-XM10
Marine Remote
Commander
3-225-765-11 (1)
Specifications
Dimensions
84.9
Ч
18.8
Ч
84.9 mm (w/h/d) (3
3
/
8
Ч
3
/
4
Ч
3
3
/
8
in.)
Mass
Approx. 113 g (4 oz.)
Supplied accessories
Parts for installation and connections (1 set)
Design and specifications are subject to change without notice.
1
Parts list
2
3
5
6
M4
(
×
2)
M4
(
×
2)
M4
Ч
65
(
Ч
2)
Dimensions
Unit: mm (in.)
7
4
8
M4
Ч
45
(
Ч
2)
M4
(
×
2)
MASTER UNIT
CHANGER
COMMANDER/
DISPLAY
59 (2
3
/
8
)
50 (2)
25 (1)
84.9 (3
3
/
8
)
* 23.9 (
31
/
32
)
8 (
11
/
32
)
4.8 (
7
/
32
)
15 (
19
/
32
)
5 m (196
7
/
8
in.)
5 m (196
7
/
8
in.)
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. RM-XM10 Serial No.
500 (19
3
/
4
)
18.8
(
3
/
4
)
200 (7
7
/
8
)
9
0
54 (2
1
/
4
)
*
For the customers in the USA
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate this equipment.