Sony HT-9900M - Manual (Page 27)

Ampl
ifier O
p
e
ration
masterpage:Right
lename[E:\SEM_Janet\Revision_HT-
950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm]
27 US
Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]
[2--549-736-12(1)]
A SW: Lights up when the audio signal is output
from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B*: Lights up in accordance with
the speaker system being used (A or B). Turns
off when speaker output is turned off or when
headphones are connected.
* For HT-5950DP, “SP” lights up in the display.
D ; DIGITAL EX: “; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG”
(page 35).
E ; PRO LOGIC IIx: “; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated.
Note
Dolby Pro Logic IIx decoding does not function
for DTS signals or for signals with a sampling
frequency of more than 48 kHz.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 35).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 24–26 for tuner operations.
I D.RANGE: Lights up when dynamic range
compression is activated (page 36).
J COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal or when INPUT MODE
is set to “COAX IN”
(page 35) .
K OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal or when INPUT MODE is
set to “OPT IN”
(page 35) .
L SLEEP: Lights up when sleep timer is
activated.
About the indications in the display
L C R
SL
SB
S SR
LFE SP A DIGITAL EX PRO LOGIC IIx DTS-ES NEO:6
D.RANGE
SLEEP OPT COAX 96/24 SP B
; ;
MEMORY SW
STEREO MONO
9 8 qs
qd
q; qa
2 1 4 3* 5 6 7
continued
US01COV_HT-5950DP-CA.book Page 27 Monday, April 11, 2005 11:37 AM