Sony NWZ-S544 - Manual (Page 6)

ModelName: Flamingo_E
PartNumber: 4-154-416-11(1)
  Basic Operations and Screens
 RESET button
Press the RESET button with a small
pin, etc., to reset the player (
p. 99).
 Strap hole
This is used to attach a strap (sold
separately).
 Microphone
See  p. 77.
 Stand hole
This is used to attach the supplied
stand.
Note
 When standing the player with the
stand, be careful not to press down on
or knock the player.
About carrying the supplied stand
Carry so as not to lose the stand as
follows.
Insert the headphone cord through
the hole of the stand, and push the
headphone cord into the base of the
V-shaped notch to secure the stand
to the headphone cord.
 WM-PORT jack
Connect the supplied USB cable, or
optional peripheral devices.
 Headphone jack
Insert the headphone plug until it
clicks into place. If the headphones
are connected improperly, the sound
from the headphones will be
impaired.
Rear
Table of
Cont
ents
Home
Menu
Inde
x