Sony HDR-PJ540 User Manual
Page 390
There is not enough free spaces for recording images. After storing the images on other media, delete unnecessary
images, or format the memory card.
The image data base file may be damaged. Check the data base file by selecting
- [Setup] - [
Media Settings]
- [Repair Img. DB F.] - the recording medium.
The memory card is damaged.
(Warning indicators pertaining to memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly.
(Warning indicator pertaining to incompatible memory card)
Incompatible memory card is inserted.
(Warning indicator pertaining to the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on another device.
(Warning indicator pertaining to the external device)
The image data base file may be damaged. Check the data base file by selecting
- [Setup] - [
Media Settings]
- [Repair Img. DB F.] - the recording medium.
The external device is damaged.
(Warning indicators pertaining to external device formatting)
The external device is damaged.
The external device is not formatted correctly.
(Warning indicator pertaining to camera-shake warning)
This product is unsteady, so camera-shake easily occurs. Hold this product steady with both hands and record the
image. However, note that the camera shake warning indicator does not disappear.
(Warning indicator pertaining to photo recording)
The recording media is full.
Photos cannot be recorded during processing. Wait for a while, then record.
You cannot capture photos while recording movies in the following situations:
When [
REC Mode] is set to [Highest Quality
]
When the [
Frame Rate] is set to [60p] (models with NTSC color system) or [50p] (models with PAL color system)
When an item of [Picture Effect] is selected
Related Topic
About the InfoLITHIUM battery pack
379