Controlling the audio device – avrcp – Sony DRC-BT15 User Manual

Page 16

Advertising
background image

DRC-BT15_U2 [US] 3-280-224-11(1)

16

US

To adjust the volume

Push the jog switch up or down
while listening to music to adjust the
volume.

Tips

• Depending on the connected device, it

may be necessary to adjust the volume
on the connected device as well.

• Volume for calling and listening to

music can be adjusted independently.
Even if you change the volume while
calling, the volume for music playback
does not change.

To stop use

1

Terminate the Bluetooth
connection by operating
the Bluetooth device.

2

Press and hold the
POWER button for
about 3 seconds.

The indicator (blue) and
indicator (red) light up together,
and the unit turns off.

Tip

When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the
Bluetooth device.

Controlling the audio
device – AVRCP

If the Bluetooth audio device
connected with this unit supports
AVRCP (Audio Video Remote
Control Profile), you can control by
using the unit buttons.
Refer to the operating instructions
supplied with the Bluetooth device
on how to operate it.

Note

Operation of the Bluetooth connecting
device by this unit will vary depending on
its specification.

Status: In stop or pause mode

1

Starts playback*

1

2

Stop

3

Skip to next/previous

4

Fast-forward/Fast-rewind*

2

Status: In play mode

5

Pause*

1

6

Stop

7

Skip to next/previous

8

Fast-forward/Fast-rewind*

2

*

1

You may need to press the button
twice depending on the Bluetooth
device.

*

2

Some Bluetooth devices may not
operate.

Note

You cannot adjust the volume of the
Bluetooth device by pushing the jog
switch of this unit up or down.

1

3

Short Press Long Press

Nx

./>

2

4

Short Press Long Press

Nx

./>

5

7

6

8

01US04OPE-BT15_U2.p65

23/10/07, 2:20 pm

16

Black

Advertising