Sony PCG-R505GCK - Manual (Page 44)

VAIO Computer Quick Start
44
Connecting Another VAIO Computer
You can use a compatible i.LINK®
*
cable (not supplied) to connect two
compatible mobile VAIO computers, and then use one computer to edit, copy, or
delete files on the other computer. You can also print from a printer that is
attached to either computer.
❑ Frequently asked questions
To connect VAIO computers
1 Plug one end of the i.LINK cable into the i.LINK port on each computer.
2 Restart both computers and log on when prompted.
3 ClickStart, point to Programs, Smart Connect, and click Smart Connect
Monitor. The Smart Connect Monitor window appears.
4 Click Option, and select Run Smart Connect Switch.
5 Click to select Enable Smart Connect.
6 Click to select STD mode, if it is not already selected.
7 Click OK. Your computers are connected.
8 To view the folders on your network:
❑ In the Smart Connect Monitor window, right-click a computer name,
and select Open with Explorer.
❑ Double-click My Network Places, and click Computers Near Me in
the My Metwork Places window.
* i.LINK is a trademark of Sony used to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software programs,
operating system, and compatible i.LINK devices. All products with an i.LINK connector
may not communicate with each other. Refer to the documentation that came with your
compatible i.LINK device for information on operating conditions and proper connection.
Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or
hard disk drive, confirm their operating system compatibility and required operating
conditions.
✍
Only i.LINK cables may be used to connect two compatible mobile VAIO
computers.