Other operations, Precautions, Specifications – Sony CFD-S50 User Manual

Page 2: Troubleshooting, For customers in the usa, Selecting play mode, Presetting radio stations, Listening to preset radio stations, Connecting optional components

Advertising
background image

Selecting play mode

You can set the unit to play tracks or files
repeatedly or in random order while a disc is
stopped.

Press MODE  repeatedly.

Each time you press the button, the indication
changes as follows:

Normal play (None)

Single repeat ( 1)

All repeat ( )

Selected folder play ( )*

Selected folder repeat play ( , )*

Shuffle play (SHUF)

Program play (PGM)

Program repeat play ( , PGM)

* These functions are available only when playing

MP3 files on an MP3 disc.

Playing tracks/files repeatedly
(Repeat Play)

You can set the unit to repeatedly play CD-DA
tracks on an audio CD, or MP3 files on a CD-R/
CD-RW disc in normal and program play modes.

1

Press CD  to turn on the CD function.

2

Proceed as follows.

To repeat

Do this

A single track/
file

1 Press MODE

repeatedly

until “ 1” appears.

2 Press

or

to

select a track/file that you
want to repeat. When you
want to specify a folder that
contains MP3 files, press
+ or

first to select a

folder, and then press

or

to select a file.

3 Press

to start Repeat

Play.

All tracks/files

1 Press MODE

repeatedly

until “ ” appears.

2 Press

to start Repeat

Play.

A selected
folder on an
MP3 disc

1 Press MODE

repeatedly

until “ ” and “ ” appear.

2 Select a folder by pressing

+ or

.

3 Press

to start Repeat

Play.

Programmed
tracks/files

1 Program tracks/files (see

“Creating your own program
(Program Play)”).

2 Press MODE

until “PGM”

and “ ” appear on the
display.

3 Press

to start Repeat

Play.

To cancel Repeat Play

Press

to stop playback, and then press

MODE

repeatedly until “ ” (or “ 1”)

disappears from the display.

Playing tracks/files in random order
(Shuffle Play)

You can set the unit to play CD-DA tracks on an
audio CD or MP3 files on a CD-R/CD-RW disc in
random order.

1

Press CD  to turn on the CD function.

2

Press MODE  repeatedly until “SHUF”
appears on the display.

3

Press

  to start Shuffle Play.

To cancel Shuffle Play

Press

to stop playback, and then press

MODE

repeatedly until “SHUF” disappears

from the display.

Note

During Shuffle Play, you cannot select the previous

track/file by pressing

 .

Creating your own program (Program
Play)

You can arrange the playing order of up to 25
tracks/files on a disc.

1

Press CD  to turn on the CD function.

2

Press MODE  repeatedly until “PGM”
appears on the display.

Other Operations

3

Press

 or   to select a track/file,

then press ENTER .
The track/file is programmed and the program
step number appears.
(Example: programming CD-DA tracks)

Step number

4

Repeat step 3 to program additional
tracks/files.
You can check the number of programmed
steps (tracks/files) by pressing DISPLAY

repeatedly.

5

Press

  to start Program Play.

The created program remains available until
you open the CD compartment cover or turn
off the power of the unit. To play the same
program again, press

.

Note

If you try to program 26 tracks/files or more, “FULL”

appears on the display.

To cancel Program Play

Press

to stop playback, and then press

MODE

repeatedly until “PGM” disappears from

the display.

To delete all tracks/files in the current

program

Stop playback, and then press

. “noSTEP”

appears and you can create a new program,
following the procedure “Creating your own
program (Program Play).

Presetting radio stations

You can store radio stations in the unit’s memory.
You can preset up to 30 radio stations, 20 for FM
and 10 for AM.

1

Press RADIO FM/AM  repeatedly to
select a band.

2

Hold down AUTO PRESET  until “AUTO”
flashes on the display.

3

Press ENTER  to store the station.
The stations are stored in memory from lower
frequencies to higher ones.

If a station cannot be preset
automatically

You need to preset a station with a weak signal
manually.

1

Press RADIO FM/AM  repeatedly to
select a band.

2

Tune to the desired station.

3

Press MANUAL PRESET  until “FM-xx”
or “AM-xx” flashes on the display.
(Example: FM)

4

Press PRESET + or

  until the preset

number for the station you want flashes
on the display.

5

Press ENTER  to store the station.
If another station is already assigned to the
selected preset number, that station is
replaced by the new one.

Listening to preset radio

stations

1

Press RADIO FM/AM  repeatedly to
select a band.

2

Press PRESET + or

  to select a stored

preset number for the desired radio
station.

Connecting optional

components

You can enjoy the sound from an optional
component, such as a portable digital music
player, through the speakers of this unit.
Be sure to turn off the power of each component
before making any connections.
For details, refer to the instruction manual of the
component to be connected.

Audio
connection
cable (not
supplied)

To component
(e.g.,portable digital
music player)

To AUDIO
IN jack

1

Connect the AUDIO IN jack  to the line
output jack of the portable digital music
player or other component using an
audio connection cable (not supplied).

2

Turn the connected component on.

3

Press AUDIO IN  and start playing
sound on the connected component.

The sound from the connected component is
output from the speakers.
To connect the unit to a TV or video recorder/
player, use an extension cable (not supplied)
with a stereo-mini plug on one end and two
phono plugs (L/R) on the other end.

Notes

 If the AUDIO IN jack  is connected to the

monaural output jack of a digital music player,

sound may not be emitted through the right

speaker of the unit.

 If the AUDIO IN jack  is connected to the line out

jack of a digital music player, distortion may occur.

If the sound is distorted, connect to the

headphones jack instead.

 If the AUDIO IN jack  is connected to the

headphones jack of a digital music player,

increase the volume of the digital music player,

and then adjust the volume of the unit.

Precautions

Discs that this unit CAN play
 Audio CDs on the market that conform to the

CD-DA*

1

standard.

 CD-R/CD-RW discs that contain audio tracks

and conform to the CD-DA*

1

standard.

 CD-R/CD-RW discs that contain MP3 files and

are finalized*

2

correctly.

*1

CD-DA is the abbreviation for Compact Disc

Digital Audio. It is a recording standard used for

audio CDs.

*2

Finalizing is the process to make the CD-R/

CD-RW discs playable on the consumer disc

player products, and the finalizing can be

enabled or disabled as optional settings during

disc creation in most recording software.

Discs that this unit CANNOT play
 CD-R/CD-RW discs other than those recorded

in audio CD format or formats conforming to
ISO 9660 Level 1/Level 2 or Joliet

 CD-R/CD-RW discs of poor recording quality,

CD-R/CD-RW discs with scratches or those are
dirty, or CD-R/CD-RW discs recorded using an
incompatible recording device

 CD-R/CD-RW discs that are unfinalized or

finalized incorrectly

 CD-R/CD-RW discs that contain files created in

audio formats other than MP3

Notes on discs
 Before playing, clean the CD with

a cleaning cloth. Wipe the CD
from the center out. If there are
scratches, dirt or fingerprints on
the CD, a tracking error may occur.

 Do not use solvents such as

benzine, thinner, commercially
available cleaners or anti-static
spray intended for vinyl LPs.

 Do not expose the CD to direct sunlight or heat

sources such as hot air ducts, or leave it in a
car parked in direct sunlight as there can be a
considerable rise in temperature inside the car.

 Do not stick paper or a sticker on the CD, or

scratch the surface of the CD.

 After playing, store the CD in its case.

Note on DualDiscs
 A DualDisc is a two sided disc product which

mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does
not conform to the Compact Disc (CD)
standard, playback on this product is not
guaranteed.

Music discs encoded with copyright

protection technologies
 This product is designed to playback discs that

conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are
marketed by some record companies. Please
be aware that among those discs, there are
some that do not conform to the CD standard
and may not be playable by this product.

Notes on cassettes
 Remove the overwrite protection tab from side

A or B to prevent accidental recording. If you
want to reuse the tape for recording, cover the
broken tab using adhesive tape.

Side A

Tab for side B

Tab for side A

Poor or distorted playback, recording or

erasing quality.
 Clean the surfaces of the pinch roller, play/

recording head and erase-head as shown
below using a dry cotton swab. If the surfaces
are still dirty, clean them using a cotton swab
moistened with a commercially available
cleaning fluid.

Lever*

Play/Recording
head

Capstan

Erase-head

Pinch roller

* Expose the erase-head by

pressing the recording button (

) while holding down the lever

with your finger.

 Demagnetize the heads using a commercially

available tape head demagnetizer.

 Use a type I (normal) cassette tape. You cannot

use the type IV (metal) tapes or type II (high
position) tapes with this system. These types
may cause sound distortion.

After trying the suggested remedies, if the
problem persists, unplug the AC power cord or
remove all the batteries. After all the indications
on the display disappear, plug in the AC power
cord again, or re-insert the batteries. If the
problem persists, consult your nearest Sony
dealer.

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
(The United States model only)
With 4-ohm loads, both channels driven from
150 Hz

 10,000 Hz; rated 1.1 W per channel-

minimum RMS power, with no more than 10 %
total harmonic distortion in AC operation.

CD player section
System

Compact disc digital audio system

Laser diode properties

Emission duration: Continuous
Laser output: Less than 44.6 μW
(This output is the value measurement at a
distance of 200 mm from the objective lens
surface on the optical pick-up block with 7 mm
aperture.)

Number of channels

2

Frequency response

20 Hz

 20,000 Hz +1/–2 dB

Wow and flutter

Below measurable limit

Supported audio format

MP3 (MPEG 1 Audio Layer-3)

Bit rates: 32 kbps

 320 kbps, VBR

Sampling frequencies: 32/44.1/48 kHz

 The use of a cassette tape with more than

90 minutes of play time is not recommended
except for long, continuous recording or
playback.

On safety
 As the laser beam used in the CD player

section is harmful to eyes, do not attempt to
disassemble the casing. Refer servicing to
qualified personnel only.

 Should any solid object or liquid fall into the

unit, unplug the unit, and have it checked by
qualified personnel before operating it any
further.

 Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do
not use such discs.

On power sources
 For AC operation, use the supplied AC power

cord; do not use any other cord.

 Unplug the unit from the wall outlet if it is not

to be used for an extended period of time.

 When not using the batteries, remove them to

avoid damage that can be caused by battery
leakage or corrosion.

On placement
 Do not leave the unit in a location near heat

sources, in a place subject to direct sunlight,
excessive dust or mechanical shock, or in a car
subject to the direct rays of the sun.

 Do not place the unit on an inclined or

unstable surface.

 Do not place anything within 10 mm of the rear

of the cabinet. The ventilation openings must
be unobstructed for the unit to operate
properly and prolong the life of its
components.

 Since a strong magnet is used for the speakers,

keep personal credit cards using magnetic
coding or spring-wound watches away from
the unit to prevent possible damage from the
magnet.

On operation
 If the unit is brought directly from a cold to a

warm location, or is placed in a very damp
room, moisture may condense on the lens
inside the CD player section. Should this occur,
the unit will not operate properly. In this case,
remove the CD and wait about an hour for the
moisture to evaporate.

On handling the unit
 Do not leave the CD compartment open to

avoid dust and debris contamination.

On cleaning the cabinet
 Clean the cabinet, panel and controls using a

soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent, such
as alcohol or benzine.

If you have any questions or problems
concerning your unit, consult your nearest Sony
dealer.

Troubleshooting

General

The power does not turn on when the AC

power cord is connected.
 Make sure the AC power cord is connected to

the wall outlet securely.

The power does not turn on during

battery operation.
 Make sure the batteries are inserted correctly.

There is no sound.
 Make sure the appropriate function is selected

for the music or sound source you want to
listen to.

 Unplug the headphones when listening

through speakers.

CD/MP3 player

The CD player does not play or “noDISC”

is displayed even when a CD is in place.
 Place the CD with the label side up.
 Clean the CD.
 Take out the CD and leave the CD

compartment open for about an hour to dry
moisture condensation.

 The CD-R/CD-RW is blank or unfinalized.
 There are no playable MP3 files on the disc.
 There is a problem with the quality of the

CD-R/CD-RW, recording device or application
software.

 Replace all the batteries with new ones if they

are exhausted.

The sound drops out.
 Reduce the volume.
 Clean the CD, or replace it if the CD is badly

damaged.

 Place the unit in a location free from vibrations.
 Clean the lens with a commercially available

blower.

 The sound may drop out or noise may be

heard when using a poor quality CD-R/CD-RW
or if there is a problem with the recording
device or application software.

Starting playback takes more time than

usual.
 The following discs take a longer time to start

playback.
 A disc recorded with a complicated tree

structure.

 A disc that has many folders or non-MP3

files.

Radio

The sound is weak or reception is poor.
 Replace all the batteries with new ones.
 Move the unit away from nearby TVs.
 For FM reception, extend the antenna to its full

length, and reorient it for best FM reception.
For AM reception, reorient the unit itself to find
the best reception.

 If you are in a building, listen near a window.
 If a mobile phone is placed close to the unit, a

loud noise may be heard from the unit. Keep
the phone away from the unit.

The TV picture is unstable.
 If you are listening to an FM program near a TV

with an indoor antenna, move the unit away
from the TV.

Tape

The tape does not move when you press

an operation button.
 Close the cassette compartment cover

securely.

The

button does not function or the

tape does not start playback or recording.
 Make sure that the overwrite protection tub

has not been removed.

Radio section
Frequency range

FM: 87.5 MHz

 108 MHz (100 kHz step)

AM: 530 kHz

 1,710 kHz (10 kHz step)

Intermediate frequency

FM: 300 kHz
AM: 400 kHz

Antennas

FM: Telescopic antenna
AM: Built-in ferrite bar antenna

Tape deck section
Recording system

4-track 2-channel, stereo

Fast winding time

Approx. 150 s (sec.) with Sony cassette C-60

Frequency response

Type I (normal): 80 Hz – 10,000 Hz

Input
AUDIO IN

Stereo mini jack

Output

 (headphones) stereo mini jack

For 16 

 32 

impedance headphones

General
Speaker

Full range, 8 cm dia., 4 

, cone type (2)

Power output

1.7 W + 1.7 W (at 4 

, 10% harmonic distortion)

Power requirements

120 V AC, 60 Hz (AC power supply)
9 V DC (6 R14 (size C) batteries)

Power consumption

AC 12 W (approx. 0.8 W at the power saving
mode)

Battery Life*

1,

*

2

Playback of CD

Approx. 8 hours (at a volume level of around
24)

Recording FM programs

Approx. 19 hours

Playback of tape

Approx. 13 hours (at a volume level of around
24)

*

1

Measured by Sony standards. The actual

battery life may vary depending on the

circumstances of the unit or operating

conditions.

*

2

When using Sony alkaline batteries

Dimensions

Approx. 320 mm × 139 mm × 219 mm
(12

5

/

8

in × 5

1

/

2

in × 8

5

/

8

in) (W/H/D) (incl.

projecting parts)

Mass

Approx. 2.0 kg (4 lb 6 oz)
Approx. 2.3 kg (5 lb 1 oz) (including the weight
of a disc, batteries and a cassette tape)

Supplied accessories
AC power cord (1)

Design and specifications are subject to change
without notice.

For customers in the USA

Please register this product on line at the
following website.
http://www.sony.com/productregistration
Proper registration will enable us to send you
periodic mailings about new product, services
and other important announcements.
Registering your product will also allow us to
contact you in the unlikely event that the product
needs adjustment or modification. Thank you.

Rear

Advertising
This manual is related to the following products: