Sony KDL-46SL140 - Manual (Page 8)

8
You can bundle the connecting cables as illustrated
below.
~
• Do not bundle the AC power cord with other connecting
cables.
This TV can be installed on a wall by using a Wall-
Mount Bracket (sold separately). Before mounting
the TV on a wall, the Table-Top Stand must be
removed from the TV.
~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
• For product protection and safety reasons, Sony
strongly recommends that you use the Wall-Mount
Bracket model designed for your TV and the wall-
mounting of your TV should be performed by a
Sony dealer or licensed contractor.
Use your TV with the following WALL-MOUNT
BRACKET only.
• For bracket installation, refer to the instructions on
page 9 and the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise
is required for installing this TV, especially to
determine the strength of the wall that will withstand
the TV’s weight.
• Be sure to store the removed screws and Table-Top
Stand in a safe place until you are ready to reattach the
Table-Top Stand. Keep the screws away from
children.
• Be sure to use the screws supplied with the Wall-Mount
Bracket when attaching the mounting hooks to the TV
set.
The supplied screws are designed so that they are 8 mm
to 12 mm in length when measured from the attaching
surface of the mounting hook. The diameter and length
of the screws differ depending on the Wall-Mount
Bracket model. Use of screws other than those supplied
may result in internal damage to the TV set or cause it
to fall, etc.
Bundling the Connecting Cables Preparation for Wall-Mounting
Sony TV Model No.
KDL-40SL140
KDL-46SL140
Sony Wall-Mount Bracket Model No. SU-WL500
Screw (supplied with the Wall-Mount
Bracket)
Mounting Hook
Rear of the TV set
8-12 mm