Sony KDL-46SL140 - Manual (Page 9)

9
Gettin
g
Starte
d
Follow the simple steps below to remove the Table-
Top Stand:
1
Disconnect all the cables from the TV.
2 Remove the four screws from behind the TV as
indicated below. Do not remove any other
screws from the TV.
3 Gently lay the TV (face down) onto a level and
stable surface covered with a thick and soft
cloth.
4 Secure the Mounting Hooks to the rear of the
TV. For more details refer to Install the Wall-
Mount Bracket and also the instruction guide
provided by the Wall-Mount Bracket model for
your TV.
~
• If an electric screwdriver is used, set the torque to
tighten at approximately 1.5 N·m {15Kgf·cm}.
To Customers
Your KDL-40SL140/KDL-46SL140 can be
wall-mounted using a Wall-Mount Bracket (sold
separately). See table on page 8 showing the Wall-
Mount Bracket model appropriate for your TV.
For product protection and safety, Sony strongly
recommends that you use the Wall-Mount
Bracket designed for your TV and wall-
mounting is performed by a Sony dealer or a
licensed contractor. Do not attempt to install it
yourself. Sony is not liable for any damage or
injury caused by mishandling or improper
installation.
Please provide your licensed contractor with this
installation information as well as instructions
supplied with the Wall-Mount Bracket.
To Sony Dealers and Licensed Contractors
To avoid injury and property damage, read these
instructions carefully. Periodic inspection and
maintenance is highly recommended to ensure that
TV is securely mounted.
Installing the Wall-Mount Bracket and
Mounting Hooks
1
Open the Wall-Mount Bracket package and
check for all the required parts including the
instruction.
2 See the Installation Dimensions Table on
page 10 to determine the best location for wall-
mounting. The wall must be strong enough to
support at least four times the weight of the
TV. Also refer to the instruction provided with
your Wall-Mount Bracket.
Installing the Wall-Mount Bracket
(Continued)