Sony VPCCW Series Hard Disk Drive (Replacement Instructions) - Manual

VPCCW Series Hard Disk Drive
Replacement Instructions
P/N 989200670 Rev. A 1/3
Step 2. Remove the Battery Pack.
Locate the release tab as shown in the
picture.
1. Slide the left battery tab to the
Unlock position.
2. With your finger slide the right
battery tab in the release
direction and hold.
3. Hook your finger under the
battery pack and lift.
(Look for the screw hole with 2 dots)
(HDD Removal) Steps 3-7)
Step 3. Rotate the computer with the
Hard Disk Drive (HDD) Bay facing
you as shown in the picture. Using
the enclosed magnetic screwdriver,
remove the (2) screws securing the
hard drive access cover.
Step 1. Prepare the Computer.
CAUTION : Make sure the
computer is turned off, the lid is
closed, and the AC Adapter is
disconnected. Failure to do so can
result in damage to the computer.
Place the computer upside down on a
protected surface with the front edge
facing you.
These easy instructions are intended to guide you through the replacement process.
Before you begin, place your notebook computer on a clean or covered surface to avoid
damage to the computer's case.*
Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o
Hold parts by the edges, away from exposed circuitry when possible.
o
Do not walk around excessively as this promotes static build-up.
Remove jewelry before you begin work to avoid scratching the surface of your notebook
computer.*
The appearance of the electronic components shown in the illustrations may be different from
the components shipped. This slight difference does not affect the accuracy of these
instructions.
* Sony is not responsible for damage caused by incorrect handling of the notebook computer.
IMPORTANT!
PLEASE READ BEFORE YOU START
1.
2.
3.