Replacing the lithium battery – Sony PCV-LX920 User Manual

Page 42

Advertising
background image

VAIO Slimtop System Reference Manual

30

Replacing the Lithium Battery

You may need to replace the lithium battery if your computer consistently
loses the date or time settings after turning it off. The lithium battery has
a typical life of three years, after which the battery may be too weak to
power the CMOS memory.

1

Reboot your computer by selecting Shut Down... from the Start
menu, and then selecting Restart the computer.

2

If the error message “Error: Check date and time settings” appears
during the reboot sequence, press F3, then press F2 during the reboot
process to access the BIOS Setup Utility. If the error message does not
appear, you do not need to replace the battery at this time, and you
can skip all remaining steps.

3

Compare all the BIOS options to their default settings. See

“CMOS

Setup Options”

on page 51 to locate the BIOS default settings. Make a

list of all the BIOS options that are different from their default values.
Refer to this list when you restore the BIOS settings later.

4

Press ESC, then select Exit from the main menu using the right arrow
key. Exit Discarding Changes, the first item in the list, is
automatically selected.

5

Press Enter, type N when prompted to save, then press Enter to exit
the BIOS Setup Utility.

6

Turn off the computer, and unplug the power cord.

7

Remove the system cover (see

“Removing the System Cover” on

page 24

).

!

Sony recommends that you use an authorized service dealer to replace the

lithium battery. However, if you wish to replace the battery yourself, read
the following cautions and procedure.

When you remove the lithium battery, all values stored in the CMOS memory

(BIOS setup values and Plug and Play values) may be lost. Although the
computer can hold the charge for a short time while replacing the battery, it
is safer to assume that the settings will be lost. When the values are lost, the
BIOS values revert to their factory-default settings (see

“Accessing the

CMOS Setup Utility”

on page 16).

Do not handle damaged or leaking batteries.

The lithium battery may explode if mistreated. Do not disassemble it or

dispose of it in fire.

Advertising