Sony PCG-Z505HE - Manual (Page 76)

VAIO ® Z505 SuperSlim Pro Notebook User Guide 66
My printer doesn't function after the computer resumes from a power
saving mode
When this occurs, follow the procedures below to reset the printer
connection:
1
Right-click the My Computer icon on the desktop, and then select
Properties.
2
Click the Device Manager tab.
3
Select Refresh, and then click OK.
The printer should now function properly.
Movements of the displayed images are awkward (not smooth)
In PowerPanel, select Change CPU Speed. Remove the check from Auto,
and set Speed Control to OS Controlled.
I cannot play a CD-ROM
❑
Make sure the label of the CD-ROM is facing up.
❑ If the CD-ROM requires software, make sure the software is installed
according to the program’s instructions.
❑ Moisture condensation may have occurred. Disconnect the CD-ROM
drive and disconnect the power to the drive for at least one hour.
❑ Make sure the CD-ROM drive is properly connected. See “Connecting
the CD Drive” on page 51.
❑ Clean the CD-ROM.
❑ Check the speaker volume.
When I click an application icon a message appears, such as “You must insert
the application CD into your CD-ROM drive,” and the software does not start
❑
Some titles require specific files that are located on the application’s
CD-ROM. Insert the disc and try starting the program again.
❑ Make sure you place the disc in the tray with the label side facing up.
My floppy disk drive cannot write to a diskette
❑
The diskette is write-protected. Disable the write-protect feature or
use a diskette that is not write-protected.
❑ Check that the diskette is properly inserted into the floppy disk drive.