Sony NEX-5R User Manual

Page 230

Advertising
background image

230

GB

Ta
ble
of

co
nt

e

n

ts

Sa
mp
le

pho

to

Me
nu

In

dex

Cannot recognize lens. Attach it properly.

• The lens is not attached properly, or the lens is not attached. If the message appears when a lens is

attached, reattach the lens. If the message appears frequently, check whether the contacts of the lens
and camera are clean or not.

• When attaching the camera to an astronomical telescope or something similar, set [Release w/o Lens]

to [Enable] (page 147).

• The SteadyShot function does not work. You can continue to shoot but the SteadyShot function will

not work. Turn the camera off and on. If this icon does not disappear, consult your Sony dealer or
local authorized Sony service facility.

• The lens with power zoom is retracted. Turn off the camera and eject the battery pack, then reinsert

the battery pack.

No images.

• There is no image on the memory card.

Image protected.

• You tried to delete protected images.

Unable to print.

• You tried to mark RAW images with a DPOF mark.

Internal temp. high. Allow it to cool.

• The camera has become hot because you have been shooting continuously. Turn the power off. Cool

the camera and wait until the camera is ready to shoot again.

• You have been recording images for a long time, the camera temperature has risen. Stop recording

images until the camera cools.

• The number of images exceeds that for which date management in a database file by the camera is

possible.

• Unable to register to the database file. Import all the images to a computer using “PlayMemories

Home” and recover the memory card.

Camera Error. Turn power off then on.

• Turn the power off, remove the battery pack, and then re-insert it. If the message appears frequently,

consult your Sony dealer or local authorized Sony service facility.

Image DataBase File error

• There is something wrong occurred in the Image Database File. Select [Setup]

t [Recover Image

DB].

Image Database File error. Recover?

• You cannot record or play back AVCHD movies because the Image Database File is damaged.

Follow the on-screen instructions to recover data.

Continued

r

Advertising
This manual is related to the following products: