Sony HDR-TG5 - Manual (Page 92)

9
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
OUTPUT SETTINGS
(Items for when connected to a TV)
The default settings are marked with .
TV TYPE
You need to convert the signal depending on the TV connected when playing back movies
and photos. The recorded movies and photos are played back as following illustrations.
Steps
(MENU)

[TV TYPE] (under [OUTPUT SETTINGS] category)

a desired
setting
 
 16:9
Select this to view your movies on a 16:9 (wide) TV. The recorded movies
and photos are played back as shown below.
Movies and photos recorded in 16:9
(wide) mode
Movies and photos recorded in 4:3
mode
4:3
Select this to view your movies and photos on a 4:3 standard TV. The
recorded movies and photos are played back as shown below.
Movies and photos recorded in 16:9
(wide) mode
Movies and photos recorded in 4:3
mode
Notes
Horizontal to vertical ratio of high definition image quality (HD) movies is 16:9.
When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, set [TV TYPE] to
[16:9]. The TV switches to full mode automatically. Refer also to the instruction manuals supplied with
your TV.
COMPONENT
Select [COMPONENT] when connecting your camcorder to a TV with the component input
jack.


