Sony DSLR-A580L - Manual (Page 108)

108
Setting ISO
Sensitivity to light is expressed by the ISO number (recommended
exposure index). The larger the number, the higher the sensitivity.
Notes
• When the exposure mode is set to AUTO, Sweep Shooting, or Scene Selection, ISO
is fixed to AUTO and you cannot select other ISO numbers.
• When the exposure mode is set to P/A/S and ISO is set to [AUTO], ISO is
automatically set between ISO 100 and ISO 1600 (DSLR-A580)/ISO 200 and ISO
1600 (DSLR-A560).
• The [AUTO] setting is not provided in exposure mode M. If you change the
exposure mode to M with the [AUTO] setting, it is switched to the minimum ISO
sensitivity. Set the ISO according to your shooting conditions.
Multi frame noise reduction (Multi Frame NR)
The camera automatically shoots multiple images continuously, combines
the images, reduces the noise, and records one image. In Multi Frame NR,
you can select ISO numbers up to ISO 25600.
The image recorded is one combined image.
Notes
• Press and hold the shutter button until the continuous shooting stops.
• When [Image: Quality] is set to [RAW] or [RAW & JPEG], this function cannot be
used.
• The flash, D-Range optimizer, and [Auto HDR] cannot be used.
1
Press the ISO button to display
the ISO screen. ISO button
2
Select the desired setting with v/V on the controller.
• The larger the number, the higher the noise level.
• If you select [Multi Frame Noise Reduct.], select the desired value with b/
B.