Sony KLV-S32A10 - Manual (Page 25)

Connecting the TV
25
Conn
ectin
g the
TV
Notes on Using This Connection
To connect a DVD player with S VIDEO and audio connectors
If your DVD player does not have component video (YP
B
P
R
) jacks, or the
component video inputs are already connected to another device, use this
connection.
1
Use an S VIDEO cable to connect the DVD player’s S VIDEO output
jack to the TV’s S VIDEO input jack (VIDEO 1 or 3).
2
Use an audio cable to connect the DVD player’s AUDIO output jacks to
the TV’s AUDIO input jacks (VIDEO 1 or 3).
To Do This ... Do This ...
Watch the DVD player Press WEGA GATE to select the DVD player input (Video 4) in the External Inputs
list.
or
Press TV/VIDEO repeatedly to select the DVD player input (Video 4).
Set up the remote control to
operate the DVD player You must program the remote control. See “Programming the Remote Control” on
page 34.
Activate the remote control to
operate the DVD player Press DVD/VCR (FUNCTION) .
Control DVD functions with the
remote control See “Operating a DVD Player or DVD Changer” on page 36.
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Label Video Inputs on page 61.
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.