Sony KLV-S32A10 - Manual (Page 11)

Introducing the TV
11
Introd
ucin
g the
TV
Installing the TV
Preventing the TV
from Toppling Over Attaching the Support Belt
1
Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
2
Attach the support belt to the stand, and screw the belt with a securing
screw (supplied) using a coin, etc.
3
Adjust the length by pulling the support belt towards you while holding
the TV stand.
When Mounting on a Wall
Be sure to use the following optional wall-mount brackets to hang the TV on
the wall.
KLV-S19A10: SU-WL11
KLV-S23A10/KLV-S26A10/KLV-S32A10: SU-WL31
See the Instruction Guide supplied with the wall-mount bracket on how to
mount the TV on the wall.
Be sure to take measures to prevent the TV from toppling over and
causing injury.
The supplied wood screw may not be used depending on the type of TV
stand. In this case, or when the securing strength is not enough,
prepare commercial screws to fit to the TV stand. Use commercial
screws of 3 to 4 mm diameter. Consult your dealer about the types of
screw.