Sony KLV-S32A10 - Manual (Page 13)

Introducing the TV
13
Introd
ucin
g the
TV
TV Controls and Connectors
Front and Top Panel
7 8 9 0
qa
PIC OFF TIMER POWER
ENTER WEGA GATE
TV/VIDEO VOLUME CHANNEL POWER
1 2 3 6 4 5
Item Description
1 ENTER Press to confirm the selection or setting.
2 WEGA GATE Press to display WEGA GATE . Press again to exit WEGA GATE .
3 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s video inputs.
4
– VOLUME +
Press to adjust the volume. In the WEGA GATE screen, these buttons serve as left/right
buttons.
5
– CHANNEL +
Press to scan through channels. To scan quickly through channels, press and hold down either
CHANNEL . In the WEGA GATE screen, these buttons serve as up/down buttons.
6 POWER Press to turn on and off the TV.
7 (IR) Infrared
Receiver/Light
Sensor Receives IR signals from the remote control.
Senses room light level and adjusts the screen brightness accordingly (see page 61 for details).
Do not put anything near the sensor, as its function may be affected.
8 PIC OFF LED When lit, indicates that the Picture Off feature is activated. For details, see page 61.
9 TIMER LED When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit even
if the TV is turned off. For details, see page 58.
0 POWER LED Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see “Contacting Sony” on page 2).
qa Speaker Outputs audio signal.
The CHANNEL + button has a tactile dot. Use it as a reference when operating
the TV.