Connections at the remote module – Adder Technology ADDERLINK X2 User Manual
Page 11
10
Connections at the REMOTE module
Keyboard, video and mouse connections
The connections to the keyboard, video monitor and mouse are all made to the
sockets at one end of the REMOTE module.
1 Attach the lead from
the monitor to the
blue D-type socket
labelled
on the
REMOTE module.
2 Connect the
keyboard lead to
the purple mini-DIN
socket labelled
on the REMOTE
module.
3 Insert the keyboard
lead into the green
mini-DIN socket
labelled on the
REMOTE module.
Twisted pair, power and serial connections
1 Insert the connector
from the twisted pair
cable link into the
socket marked ‘TO
LOCAL’.
2 Attach the output
connector of the
power supply to the
socket at the front
edge of the REMOTE
module labelled
POWER.
3 If a serial connection is
to be used, attach the
lead from your serial
device to the 9 way
male connector on the REMOTE module labelled
.
Power supply connection
1 Insert the IEC connector of the supplied power lead into the corresponding
socket of the power supply. Connect the other end of the power lead to a
nearby mains socket.
Connection
from video
monitor
Connection
from
keyboard
Connection
from mouse
REMOTE
IEC power connector
Twisted pair
connection
Connection
from serial
device
Power
supply
connection
REMOTE