Sony XBR-55X900B - Manual (Page 53)

Be sure to use an authorized HIGH SPEED HDMI cable
bearing the HDMI logo.
If connecting a digital audio system that is compatible with
Audio Return Channel (ARC) technology, use HDMI IN 1. If
not, an additional connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
HDMI IN 1/3
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all-digital audio/video interface between this
TV and an HDMI-equipped audio/video device.
You can view photos in 4K resolution by connecting a digital
still camera that supports HDMI 4K output.
In addition, when you connect a BRAVIA Sync-compatible
device, communication with the connected device is supported.
Be sure to use an authorized HIGH SPEED HDMI cable
bearing the HDMI logo.
If connecting a digital audio system that is compatible with
Audio Return Channel (ARC) technology, use HDMI IN 1. If
not, an additional connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
REMOTE
These jacks are for receiving the external control signal.
Enables extended control of the TV using RS232C via the IR
IN and Serial Control jacks.
IR IN : connect to the IR out terminal of the home controller.
Serial Control : connect to the RS232C terminal of the home
controller.
Take care to not connect to headphones or an external
audio system.
If [RS232C Control] is set to [On], [BRAVIA Sync Settings]
is not available.
RF input that connects to your cable or antenna.
List of Contents © 2014 Sony Corporation
Top of Page
47