Sony PCG-R505JL User Manual
Page 62
VAIO® R505 SuperSlim Pro™ Notebook Quick Start
62
❑
If you plugged the notebook into a power strip or UPS, make sure the power
strip or UPS is turned on and working.
❑
If you are using an external display, check that it is plugged into a power
source and turned on. Check that the brightness and contrast controls are
adjusted correctly. See the manual that came with your display for details.
❑
Take the battery pack off the notebook, unplug the power cord and plug it in
again, then turn on the power.
❑
If the power control button does not function, remove the AC adapter and
battery pack and wait 1 minute, then reattach them and press the power
button.
❑
Condensation may cause the notebook to malfunction. If this occurs, do not
use the notebook for at least 1 hour.
My notebook starts but a BIOS error appears.
When the internal backup battery is low on power, your system may not start
properly, and the message “Press <F1> to resume, <F2> to setup” may appear at
the bottom of the screen. Follow these steps:
1
Press F2. The BIOS Setup menu appears.
2
Set the date (month/day/year). Press Enter.
3
Press
to select System Time, then set the time (hour: minute: second).
Press Enter.
4
Press
to select Exit, then press to select Get Default Values. The
message “Load default configuration now?” appears.
5
Select Yes and press Enter.
6
Select Exit (Save Changes), then press Enter. The message “Save
Configuration changes and exit now?” appears.
7
Select Yes, then press Enter. The notebook restarts.
✍
If this occurs on a regular basis, contact Sony PC Support
(http://www.sony.com/pcsupport).
Р
О
Р