Connecting the wireless mouse, User guide – Sony SVT21223CYB User Manual
Page 309
Personal Computer
VAIO Tap 21
SVT2122
Connecting the Wireless Mouse
If you cannot use the wireless mouse supplied with your VAIO computer, it is likely that wireless connection setup is
required between the wireless mouse and the computer.
1. Check that an AA battery is inserted in the wireless mouse you want to connect, and then slide the mouse’s power
switch to
OFF.
2. While pressing and holding the central wheel of the mouse, slide the mouse’s power switch to
ON.
The status light turns on. Keep the central wheel pressed.
3. Turn on your VAIO computer. While the VAIO logo is displayed, press and hold the central wheel of the mouse and
put the mouse immediately in front of your computer’s screen.
The status light turns off and the connection is then established.
About turning on your VAIO computer, see
for more information.
Note
The connection procedure is not usually required to use the wireless mouse with your VAIO computer.
Do not perform the connection procedure if you can use the wireless mouse normally. Doing so may cause computer
malfunction.
Related Topic
About the Usage Environment for the Mouse
Copyright 2013 Sony Corporation
How to Use
309