Changing the rapid wake (sleep mode) settings, User guide, How to use – Sony SVF14A14CXB User Manual
Page 339: Troubleshooting list of topics, Vaio fit 14/15
Personal Computer
VAIO Fit 14/15
SVF14A1/SVF15A1
Changing the Rapid Wake (Sleep Mode) Settings
You can change the Rapid Wake settings in VAIO Control Center.
Rapid Wake is enabled by default. With this function, your VAIO enters Sleep
mode after your working data is saved on the built-in storage device.
1. Start VAIO Control Center and select Hardware. (See
to start VAIO Control Center.)
2. Enable/disable the setting in Rapid Wake.
Note
With Rapid Wake disabled:
Your working data is not saved on the built-in storage device when your VAIO
computer enters Sleep mode. Therefore, if the computer is turned off during Sleep
mode because, for example, the battery pack runs out of power or the computer
is disconnected from an AC power source, the working data will be lost. To avoid
data loss, be sure to save the data before the computer enters Sleep mode.
If your VAIO computer is equipped with the power indicator, it blinks slowly in
orange during Sleep mode. When the battery pack runs out of power during Sleep
mode, the charge indicator light blinks. If the computer is equipped with the
power indicator, it blinks along with the charge indicator.
Related Topic
Using Sleep Mode
Notes on Sleep Mode
Back Back to Top
© 2013 Sony Corporation
339
Search