Sony VGN-C190PW - Manual (Page 2)

VGN-C1xx Series Hard Disk Drive
Replacement Instructions
P/N 994643800 Rev. C 2/2
Step 4. Using the enclosed magnetic
screwdriver, loosen the two (2) screws
securing the hard disk drive access
door. Step 5. To initiate the removal of the
HDD, pull slightly the HDD front cover
as shown in the picture. Step 6. With even force slide out the
HDD as shown. Some force may be
needed to unlock the HDD from the
connector.
Step 7. Hold the new HDD by the edges
and align it on the opening. With an
even force, slide in the new HDD. Step 8. Make sure the new HDD is
seated flush on the edge of the
computer. Step 9. Reinstall the two (2) previously
removed screws.
Step 10. Reinstall the Battery Pack and
reconnect the AC Adapter.
Power on your computer and continue
with the recovery process by following
instructions described on the back of the
recovery disk’s case.
Return the old HDD to Sony following
the included shipping instructions.