Salton, Inc AC8TSTG User Manual
Page 9
USER MAINTENANCE
INSTRUCTIONS
This appliance requires little
maintenance. It contains no user
serviceable parts. Do not try to
repair it yourself. Contact a
qualified appliance repair
technician if the product
requires servicing.
Cleaning
1. The Straightener must be
completely cooled and
unplugged before cleaning.
2. Wipe the Straightener with a
damp cloth. Do not use clean-
ing solutions on Straightener or
Straightening Plates.
3. For stubborn product build up
on Straightening Plates,
dampen cloth with warm water
and rub off. Do not use sharp-
edged metal tools or abrasive
cleaning pads as they will
scratch the surface of the
Straightening Plates.
4. Make certain the Straightener is
completely dry before using.
Keep heated surfaces of the
Straightener clean and free of
dust, dirt, and styling products.
Storage
NOTE: When not in use,
make sure the Straightener is
unplugged.
1.Slide the ON/OFF Switch to the
OFF position. The red POWER
ON Light will turn off.
2. Unplug the Power Cord from
the electrical outlet.
3. Allow the appliance to cool
completely. Once the
Straightener is cooled, fold up
the Handles by pressing in both
Handle Release buttons and
turning Handles in the direction
of the “CLOSE” arrows until
they are locked in position for
compact storage.
4. Store in a cool, dry location.
5. Never wrap the power cord
around the Straightener, as this
will cause the cord to wear
prematurely and break. Check
the power cord for wear and
damage regularly, particularly
where the cord enters the
appliance and the plug.
CAUTION: If the cord of this
appliance becomes damaged,
refer to the Service and Repair
section of the warranty.
8
AC8TST.qxd 6/3/2003 4:01 PM Page 8