Sony DCR-SX83 - Manual (Page 58)


US
3 lx (lux) ([LOW LUX] is set to [ON], shutter
speed 1/30 second)
* 1 The unique pixel array of Sony’s ClearVid
and the image processing system
(BIONZ) allow still image resolution
equivalent to the sizes described.
* 2 [ STEADYSHOT] is set to
[STANDARD] or [OFF].
* 3 The focal length figures are actual figures
from wide angle pixel readout.
Input/Output connectors
A/V Remote Connector: Video/audio output jack
USB jack: mini-AB
LCD screen
Picture: 6.7 cm (2.7 type, aspect ratio 16:9)
Total number of pixels: 230 400 (960  240)
General
Power requirements: DC 6.8 V/7.2 V (battery
pack) DC 8.4 V (AC Adaptor)
Average power consumption: During camera
recording, using LCD screen at normal
brightness:
Internal memory: 2.0 W
Memory card: 2.0 W
Operating temperature: 0  C to 40  C (32 °F to
104 °F)
Storage temperature: –20  C to + 60  C (-4 °F to
+140 °F)
Dimensions (approx.): 50  56  106 mm (2
Ч 2 1/4 Ч 4 1/4 in.) (w/h/d) including the
projecting parts
50  56  114 mm (2 Ч 2 1/4 Ч 4 1/2 in.) (w/
h/d) including the projecting parts, and the
supplied rechargeable battery pack attached
Mass (approx.)
210 g (7 oz) main unit only
250 g (8 oz) including the supplied
rechargeable battery pack
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V *
Operating temperature: 0  C to 40  C (32 °F to
104 °F)
Storage temperature: –20  C to + 60  C (-4 °F to
+140 °F)
Dimensions (approx.): 48  29  81 mm (1 15/16
Ч 1 3/16 Ч 3 1/4 in.) (w/h/d) excluding the
projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FV30
Maximum output voltage: DC 8.4 V
Output voltage: DC 7.2 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.12 A
Capacity
typical: 3.6 Wh (500 mAh)
minimum: 3.6 Wh (500 mAh)
Type: Li-ion
Design and specifications of your camcorder and
accessories are subject to change without notice.
Manufactured under license from Dolby
Laboratories.
Expected charging and running time
for the supplied battery pack (in
minute)
Recording media Internal memory/memory card
Charging time
(full charge)
115
Continuous
recording time
100
Typical recording
time
50
Playback time 160
The recordable time may vary depending on
the recording and subject conditions, [ REC
MODE].
Recording condition: Recording mode is set
to [SP].
Typical recording time shows the time when
you repeat recording start/stop, switching the
MODE lamp, and zooming.



