Sony VPCL112GX User Manual
Page 35
35
Using Your VAIO Computer >
Using the Keyboard
To connect the wireless keyboard
!
To connect the wireless keyboard, it must be located within a range of approximately 11.8 inches (30 cm) to approximately 39.4 inches (1 m) from the
computer.
1
Make sure the supplied two AA batteries are properly installed.
2
Turn on the computer.
3
Slide the power switch on the back of the keyboard to the ON position.
4
Press the CONNECT button (1) on the bottom of the keyboard.
5
Press the CONNECT button (2) on the back of the computer while the connect indicator light
is blinking rapidly.
The rapid-blinking connect indicator light turns off when connection is established between the computer and the
keyboard. If not, repeat the procedure.
!
The connect indicator light
blinks rapidly for about one minute to indicate that the keyboard is ready for connection with the computer. If no
connection is made during this period, the indicator light goes blinking slowly to indicate that the connection is down.