Performing initial setup operations, Multi channel surround setup – Sony HT-DDW650 User Manual

Page 15

Advertising
background image

Hooking Up and Setting Up the Speaker System

15

US

HT-DDW650 4-244-183-71(1) US

45

°

90

°

20

°

B

C

C

A

A

To avoid damaging your
speakers

Make sure that you turn down the volume
before you turn off the receiver. When you turn
on the receiver, the volume remains at the level
you turn off the receiver.

Performing initial setup
operations

Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.

Tip

To check the audio output during settings (to set up
while outputting the sound), check the connection
(page 20).

Clearing the receiver’s
memory

Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.

1

Turn off the receiver.

2

Hold down ?/1 for 5 seconds.

“INITIAL” appears in the display.
The following are reset to their factory
settings.

• All settings in the SET UP, LEVEL and

TONE menus.

• The sound field memorized for each

input selector and preset station.

• All sound field parameters.
• All preset stations.
• All index names of input selectors and

preset stations.

• The master volume is set to “VOL

MIN”.

Performing initial setup
operations

Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 46. See pages
15–19 for speaker settings and page 33 for
other settings.

Multi channel surround
setup

For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).

However, the receiver lets you place the center
speaker up to 5 feet closer (B) and the
surround speakers up to 15 feet closer (C) to
the listening position.

The front speakers can be placed from 3 to 23
feet from the listening position (A).

You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.). However, we
recommend that you place the surround
speakers behind you.

When placing surround speakers to your side

(long room)

Sub woofer

continued

Advertising