Caution, When using the stand (not supplied), When mounting the display horizontally – Sony PFM-42X1S User Manual
Page 69: When mounting the display vertically, Front, Side
13
(GB)
Caution
Provide an ample amount of space
around the display
• When you use the display, make sure there is more
space around the display than that shown in the
figure below. This will allow for proper ventilation.
• The ambient temperature must be 0 °C to +35 °C
(32 °F to 95 °F).
• When installing the display horizontally, use the
display stand SU-42B (not supplied) as a stand.
• Regarding the installation of hardware such as
brackets, screws, or bolts, we cannot specify the
products. Actual installation is up to the authorized
local dealers. Consult with qualified Sony personnel
for installation.
• While the unit is on, a certain amount of heat builds
up inside. This can cause burns. Avoid touching the
top or rear of the unit when it is powered on or just
after it has entered standby mode.
When using the stand (not supplied)
Front
20 (7
7
/
8
)
10
(4)
10
(4)
Side
10 (4)
Units: cm (inches)
Caution
5 (2)
When mounting the display horizontally
Front
10
(4)
10
(4)
25 (9
7
/
8
)
25 (9
7
/
8
)
Side
5 (2)
Units: cm (inches)
When mounting the display vertically
Front
25
(9
7
/
8
)
20
(7
7
/
8
)
10 (4)
10 (4)
Side
Units: cm (inches)
Make sure that
the
1
(standby)
switch is at the
bottom.