Sony PFM-42X1S - Manual (Page 64)

8
(GB)
Location and Function of Parts and Controls
MENU ENTER VOLUME
1 2 3 4
1 (standby) Switch / Indicator
Section
1 1 (standby) switch
Press to power on the display unit. Press again to
return to the standby mode.
Note
To protect the panel, a certain amount of time is
required to turn the unit ON/STANDBY. Wait about 8
seconds after one of these operations before pressing
this switch again.
2 STANDBY indicator
Lights up in red in the standby mode.
3 ON indicator
Lights up in green when the display unit is powered
on. Lights up in orange when the display unit is in the
power saving mode.
For more details on the power saving function, see “Power
Saving Function” on page 48 (GB).
4 Remote control detector
Receives the signals from the Remote Commander.
Control Button Section (Top)
1 MENU button
Press to show menus. Press again to hide them.
To use the MENU button to return to the previous menu
level, see “Initial Setup menu” on page 23 (GB).
2 m/M buttons
Press to move the cursor (yellow) to an item you want
to select or to adjust a value in a menu.
3 ENTER button
Press to set your choice.
4 VOLUME +/– button
Press to adjust the speaker volume.
O
N
ST
A
NDB
Y
2
1
3
4