Sony PFM-42X1S - Manual (Page 67)

11
(GB)
Location and Function of Parts and Controls
Remote Commander RM-971
1 POWER ON switch
Press to power on the display.
2 STANDBY button
Press to change the display to the standby mode.
3 MUTING button
Press to mute the sound. Press again to restore sound.
4 DISPLAY button
Press to display the input signal information and the
picture mode on the screen. Press again to hide them.
If this displayed information is left undisturbed for a
short time, it will disappear automatically.
5 INPUT1 button
Press to select the signal input to the INPUT1
connectors. Using this button together with the
ENTER button, you can change to the “Picture And
Picture (PAP)” (dual picture display) mode by
pressing the ENTER button and then pressing the
INPUT1 button.
VOL CONTRAST
ENTER
PFM
MUTING
1 2 3
4 5 6
7 8
0
9
DISPLAY STBY
POWER
ID MODE
ON
INPUT 1 INPUT 2 VIDEO OPTION
RGB/YUV
BRIGHT
H SHIFT V SHFT H SIZE
ON SET
RM-971
OFF
VSIZE
CHROMA
S/VIDEO ASPECT
MENU
6
5
2
1
3
4
0
7
qs
8
9
qa
qd
qk
ql
w;
qj
qh
wa
ws
wd
qf
qg
6 INPUT2 button
Press to select the signal input to the INPUT2
connectors.
7 RGB/YUV button
Press to select the format matching that of the input
signal connected to the INPUT1 connector. Each press
toggles between RGB and component (YUV).
8 S/VIDEO button
Press to select the signal input to the VIDEO
connectors when standard equipment or an optional
adaptor BKM-V10 is installed. Each press toggles
between COMPOSITE IN and Y/C IN.
9 M/m/</,/ENTER buttons
The M/m/</, buttons move the menu cursor
(yellow) and set values, etc. Pressing the ENTER
button sets the selected menu or setting items. Using
this button together with the INPUT1 button, you can
change to the “Picture And Picture (PAP)” (dual
picture display) mode by pressing the ENTER button
and then pressing the INPUT1 button.
q; BRIGHT button
Adjusts the brightness when Picture Mode is set to
any of “User1“ to “User3.” Press this button, then
adjust the brightness with
M/m or </, buttons 9.
qa V SHIFT button
Adjusts the vertical centering. Press this button, then
adjust the vertical centering with
M/m or </, buttons
9 .
qs H SHIFT button
Adjusts the horizontal centering. Press this button,
then adjust the horizontal centering with
M/m or
</, buttons 9.
qd VOLUME +/– button
Press to adjust the volume.
qf OPTION button
Selects the signal input to an optional adaptor (except
BKM-V10) when you install one in the unit.
qg VIDEO button
Press to select the signal input to the COMPOSITE IN
or Y/C IN of the VIDEO connectors when standard
equipment or an optional adaptor BKM-V10 is
installed.
qh Number buttons
Press to enter index numbers.