Sony SLV-N750 - Manual (Page 35)

35 Setting the timer
B
a
sic
O
p
er
at
ions
To stop recording
To stop the VCR while recording, press x STOP.
2 Press M/m to move the cursor (B) to “ Timer
set/check, ” then press OK.
3 If necessary, press M/m to move the cursor (B) to the row that is to be set.
4 Set the channel number, start and stop time,
date, and tape speed:
1 Press , to flash each item in turn.
2 Press M/m to set each item.
To correct a setting, press < to return to that
setting and reset.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
press INPUT SELECT or
M/m to display “L1” or “L2” in the “CH”
position.
To record the same program every day or the same day every week, press m
while the date is flashing. For details, see “Daily/weekly recording” below.
To use the Auto Tape Speed function, press m to display “AUTO” in the
“SPD” position. For details, see “To use the Auto Tape Speed function” on
page 36.
5 Press OK to confirm the setting.
To enter another setting, press M/m to select the next row and repeat step 4.
6 Press MENU to exit the menu.
7 Press ?/1 to turn off the VCR.
The TIMER indicator appears in the display window and the VCR stands by
for recording. When using a cable box, leave it on.
OK
PLAY
Select
: : End
:
CH START STOP DATE SPD
OK
Bb
MENU Quit
Set : Vv
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
OK
PLAY
OK
PLAY
INPUT
SELECT
Select
: : End
:
CH START STOP DATE SPD
OK
Bb
MENU Quit
Set : Vv
3 5 8 : 0 0 9 : 0 0 9 / 3 0 SP
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
PM PM
OK
PLAY
MENU
continued