Acesonic WILDCAT PK 1130 - Manual (Page 10)

Basic Operation
7
USB port and operation
1.
3.
4. USB/CARD
You can play your own video and audio files(supports
MP3,WMA, MPG, JPEG and VCD formats) stored in
external USB memory devices(e.g., flash drive, card
reader, external hard drive) by connecting any one of
such devices to USB port. Notice: these devices have
to be FAT32 formatted to be able to play content.
Inset the USB device into the USB interface
Use arrow keys to select file and press ENTER to
play.
Press the button to switch back to DVD
playback.
2. USB/CARD Press the button to make the USB menu
appear on the screen.
*If no disc is being played, the device mode will
automatically switch to USB device and play the first
2
3
4
1
USB INTERFACE OVERVIEW:
1
2
3
4.
.FILE PATH-Display current file path/address and file
name.
.THE ROOT DIRECTOR-Display the directories
(folders) .
.FILE NAME-Display the names of files under the root
directory.
FILE TYPE-Choose the type of files you want to view.
SD, MMC and mini SD slots
You can play video and audio files(supporting MP3,
WMA, MPG, JPEG and VCD formats) stored in SD and
MMC card by connecting any one of such devices into
the memory card slots. If no disc is being played, the
unit mode will automatically switch to memory card
mode to play audio and video files.
Note:
These devices have to be formatted in FAT32 in order
for it to be able to play the content inside the memory
card.
If you need to switch to memory card mode:
1. Insert the memory card into the memory card slot.
2. Press the
button to make the memory
card menu appear on the screen.
USB/CARD
SD
SD
MINISD
MINI SD MINI SD
Insert card as below Insert card as below
INFORMATION:
Pressing OSD button can display playback time and
disc information on the screen. Press DISPLAY button
again to turn it off.
TYPE OF DISC CURRENT
TOTAL TRACK
MUTE REPEAT
REPEAT
Press REPEAT button and the track will be played
repetitively. There are two methods including single
repeating and all play repeating.
By pressing A-B button can set time repeating. The first
press will set the start point and the second press will
set the end point. (Remark: the start point and the end
point must be in the same track.* CDG can not use time
repeating).
CANCEL REPEAT
REPEAT ONE
NUMBER BUTTONS:
Used for fast selection of tracks. Just press the track
number that you want to play.
DIRECTION BUTTONS:
Use direction buttons to move the cursor up, down, left
and right. Press direction buttons to move the image
when use zoom function.
ZOOM IN/OUT:
Press ZOOM button to enter the zoom in / out menu,
and the screen will display “ZOOM (1/4 to 4 times)”.
Press OK to exit. Press direction button to move the
image When use zoom function.*DVD mode only
3. The first song on your memory card should play
automatically. You can stop this playback and choose
another song to be play.
*NOTE: Machine will switch to the USB mode first then
the card memory mode if both devices are connected at
the same time.
TIME
REPEAT ALL