Sony DCR-SR65 - Manual (Page 9)

Getting Started

US
Getting Started
Step 1: Charging the battery pack
DCR-SR65/SR85
4
DCR-SR45/SR46
You can charge the “InfoLITHIUM”
battery pack (H series) after attaching
it to your camcorder.
Notes

Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
2
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
3
For DCR-SR65/SR85:
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
For DCR-SR45/SR46:
Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the jack cover and connect the
DC plug of the AC Adaptor to the DC
IN jack.
4
For DCR-SR65/SR85:
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket). Insert
the camcorder into the Handycam
Station securely, all the way to the
bottom.

When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
For DCR-SR45/SR46:
Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.

Battery pack
DC IN jack
DC plug
With the  mark
on the top
AC Adaptor
Power cord
(Mains lead)
To the wall outlet
(wall socket)
CHG lamp
POWER switch
DC IN jack
DC plug
With the  mark on the right
Power cord
(Mains lead)
AC Adaptor
To the wall outlet
(wall socket)
Open the jack cover.