Sony DSC-S700BDL - Manual (Page 92)

92
Troubleshooting
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the dedicated USB cable and reconnect it whenever you change the paper size
after the printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 79) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
The camera does not function with the lens portion extended.
• Do not attempt to force the lens that has stopped moving.
• Insert new batteries or charged Nickel-Metal Hydride batteries, then turn on the camera again.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The lens does not move when you turn off the camera.
• The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries
or use the AC Adaptor (not supplied).
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 54).
You want to change the date or time.
• Set the date and time again (page 54).
Others