Sony DVP-NC600 - Manual (Page 60)

60
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV or AV amplifier (receiver)
with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
• Depending on the units being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number may be reset to the default setting.
Reset the appropriate code number.
1
Hold down TV ?/1, and enter your TV’s
manufacturer’s code (see the table)
using the number buttons.
2
Release TV ?/1.
Code number of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Controlling the TV
You can control your TV using the buttons
below.
* Use the number buttons only to enter the code
number of controllable TVs.
Notes
Controlling TVs with the remote
1
4
7
2
5
8
0
3
6
9
Number
buttons*
TV ?/1
TV/VIDEO
VOL +/–
By pressing You can
TV ?/1 Turn the TV on or off
VOL (volume)
+/– Adjust the volume of the TV
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources
Manufacturer Code
number
Sony (default) 01
Akai 04
AOC 04
Centurion 12
Coronado 03
Curtis-Mathes 12
Daytron 12
Emerson 03,04,14
Fisher 11
General Electric 06, 10
Gold Star 03,04,17
Hitachi 02,03
J. C. Penney 04,12
JVC 09
KMC 03
Magnavox 03,08,12
Marantz 04, 13
MGA/Mitsubishi 04,12,13,17
NEC 04, 12
Panasonic 06, 19
Philco 03, 04
Philips 08
Pioneer 16
Portland 03
Quasar 06, 18
Radio Shack 05, 14
RCA 04, 10
Sampo 12
Sanyo 11
Scott 12
Sears 07,10,11
Sharp 03,05,18
Sylvania 08, 12
Teknika 03,08,14
Toshiba 07
Wards 03,04,12
Yorx 12
Zenith 15
Manufacturer Code
number