Sony VGF-WA1 - Manual

3-094-117-11(1) © 2007 Sony Corporation Printed in China
VGF-WA1_US 3-094-117-11 (1)
Wireless Digital Audio
VGF-WA1
Setup Guide
* This Setup Guide explains how to connect and set up the Wireless Digital Audio (hereinafter referred to as “this
device”). For more detailed instructions, refer to the supplied “Operating Instructions”.
STEP 1 Check the contents of the carton
 Wireless Digital Audio  Remote control  Wireless Adapter
 AC adapter  Power cord  USB cable
 Wireless Adapter connection
support cable
 Setup CD-ROM
 Operating Instructions
 Setup Guide (this leaflet)
 Warranty card
STEP 2 Plug into a power outlet
1
Connect the supplied AC adapter to this device, and then plug into a wall outlet.
The POWER lamp lights up in red.
Note
 Do not disconnect the AC adapter during the setup of this device. It may cause a malfunction.
STEP 3 Install and set up the software
Yes
Yes
No
Proceed to  .
Q1: Do you already have a wireless LAN environment that contains an access point?
Proceed to  .
(Other side)
No
Q2: Do you intend to connect the Wireless Digital
Audio to a Sony VAIO computer installed with
Windows Vista?

Using the supplied Wireless Adapter
1
Turn the AUTO INSTALL switch of the Wireless Adapter to ON.
AUTO INSTALL switch
2
Insert the Wireless Adapter into the USB port of the computer.
The Setup automatically starts.
 Tip
If you cannot insert the Wireless Adapter directly into the USB port of your computer, connect via the supplied
Wireless Adapter connection support cable.
3
Perform the setup following the instructions on the screen of your computer.
Be sure to read the precautions on the screen thoroughly.
If you have set up the VAIO Media Integrated Server in the Setup,
the preparation is complete.
To listen to the music files that are stored on your computer (PC Streaming Function), select the desired
server from the server selection screen. This device begins to connect to the server. Select the desired
music files to start playback. Refer to the supplied “Operating Instructions” for more detailed
information on how to use this device.
If your Internet service provider instructs you to use their proxy server, use the access
point connection tool to set up the proxy server settings. For more details, refer to
“Setting up the proxy server settings for the Wireless Adapter connection” in the
“Operating Instructions” (page 54).
To use this device with Windows Media Connect or Windows Media Player, proceed to
“Preparing the computer” on the back side of this guide to set up.