Sony DCR-HC30 - Manual (Page 84)

Using the Menu 84
MULTI-SOUND
You can select how to play back audio recorded on a tape in stereo mode.
b Notes
• You can play back a dual sound track cassette on this camcorder. However, you cannot
record a dual sound track on this camcorder.
• The setting returns to [STEREO] when you disconnect the power source from your
camcorder for more than 5 minutes.
AUDIO MIX
You can adjust the audio balance between the originally recorded sound (ST1)
and sound added afterwards (ST2) on the tape (p. 106).
b Notes
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
LCD/VF SET
The recorded picture will not be affected by this setting.
LCD BRIGHT
See page 20 for details.
LCD BL LEVEL
You can adjust the brightness of the LCD screen’s backlight.
b Notes
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
G STEREO Select to play back a stereo tape or dual sound track tape with main
and sub sound.
1 Select to play back a stereo tape with the left channel sound or a dual
sound track tape with main sound.
2 Select to play back a stereo tape with the right channel sound or a dual
sound track tape with sub sound.
G NORMAL Standard brightness.
BRIGHT Select to brighten the LCD screen.