Sony DCR-HC30 - Manual (Page 20)

Getting started 20
To turn off the power
Slide the POWER switch up to OFF (CHG).
Set the LENS COVER switch to CLOSE.
Step 4: Adjusting the
LCD panel and
viewfinder
Adjusting the LCD panel
You can adjust the angle and brightness of
the LCD panel to meet various recording
situations.
Even when there are obstructions between you
and the subject, you can check the subject on the
LCD screen during recording by adjusting the
angle of the LCD panel.
Open the LCD panel 90 degrees to the
camcorder, then rotate it to the desired
position.
To adjust the brightness of the LCD
screen
1 Touch .
2 Touch [LCD BRIGHT].
If the item is not displayed on the screen,
touch
/ . If you cannot find it, touch
Maximum
180 degrees
Maximum
90 degrees
LCD BACKLIGHT