Sony DSC-W55BDL - Manual (Page 99)

99
Tr
ou
bles
hoo
tin
g
Troubleshooting
Cannot print the image at the size selected.
• Disconnect the cable for multi-use terminal (DSC-W55) or the USB cable (DSC-W35) and
reconnect it whenever you change the paper size after the printer has been connected to the
camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 85) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
The camera does not function with the lens portion extended.
• Do not attempt to force the lens that has stopped moving.
• Insert a charged battery, then turn on the camera again.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The lens does not move when you turn off the camera.
• The battery pack is discharged. Replace it with a charged battery pack.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 60).
You want to change the date or time.
• Set the date and time again (page 60).
Others