Sony KDL-26N4000 - Manual (Page 19)

19
Gettin
g
Starte
d
4. Setting Up the Channel List -
Initial Setup
After you finish connecting your TV, you need to
run Initial Setup, which automatically sets up
available channels. The Initial Setup screen
appears when you turn on your TV for the first
time. If you do not want to set up the channels at
this time, you can do it later by selecting the Auto
Program option in the Channel menu (see page
33).
1 Press to turn on the TV.
The Initial Setup screen appears.
2 Press V/v to highlight the desired language,
then press .
3 Please connect cable or antenna, then select
Yes to run Auto Program.
4 Follow the help text provided on the screen to
run Auto Program. Auto Program will
scan for available channels from signal source
directly connected to the TV’s
CABLE/ANTENNA input.
5 When Auto Program is complete, select OK
to finish the Auto Program process.
To run Auto Program at a later time
❑ Use the Auto Program feature at Channel
menu as described on page 33.
To display the picture in your preferred
aspect ratio
❑ Select the proper Wide Mode as described on
pages 24 and 32.
~
• You may want to set up convenient features such as
Favorites (see page 28), Show/Hide Channels
(see page 33), Label Channels (see page 33) when
Auto Program is completed.
~
• If you want to run Auto Program later, select No.
• If you have both cable and antenna available, please
connect cable first.
• IMPORTANT: You must perform Auto Program
after cable or antenna is connected. If you cancel
Auto Program some channels may not be
available.
POWER
Please select your language:
Press to choose a language.
Initial Setup