Sony DRN-XM01CK2 - Manual (Page 2)

Radio ID
Menu icon
Menu item
Channel Category
Channel Number
Channel Name
Memory number
2 seconds
* The POWER and preset button No. 3 have a tactile dot.
Remote commander
Preset buttons
Parts and Identifications
Main unit
Display window
DSPL/BACK
MEMO
JOG roller (MENU/ENTER)
Preset buttons (1-5)*
Remote sensor
POWER*
Cradle release button
Cradle
release
button
* The X and POWER button have a tactile dot.
Using the JOG Roller (MENU/
ENTER)
Turn up or down to select channels,
select the menu items and settings, or
scroll the stored text information in
the menu operation.
Press to display the menu display, or
execute the items or settings in the
menu operation.
Displaying the Radio ID
The receiver has its own ID, and an ID number is required when
registering in XM.
1 Press POWER to turn on the main unit.
2 Turn JOG roller (or press X ⁄ x on the remote) to select
“ XM CH0 RADIO ID”.
The radio ID appears.
CHO RADIO ID
XXXXXXXX XM
Note
The Radio ID can be displayed only in Channel Scroll mode. See “Playing
the Receiver”.
Preset number
Artist Name/Feature
Song/Program Title
Additional Information
Current time and date
Adjusting the Time Difference
This unit displays the current time by correcting the time difference
between the local time and UTC (coordinated universal time) data being
transmitted. Set the “hour” of your local time in the menu display. The
factory-set is the eastern standard time.
If the current UTC data is not received, “– – : – –” appears in the display.
1 Press POWER to turn on the main unit.
2 Press JOG roller (or MENU on the remote) to show the
menu display.
The first menu item appears.
SCROLL MODE MENU
3 Turn JOG roller (or press X ⁄ x on the remote) to select
“TIME ADJUST” and press JOG roller (or ENTER on the
remote).
The “hour” flashes.
TIME ADJUST
11:12AM MENU
12:00 AM = midnight
12:00 PM = noon
4 Turn JOG roller (or press X ⁄ x on the remote) to adjust the
hour and press JOG roller (or ENTER on the remote).
The display returns to the tuned channel display.
Note
This unit does not have the Daylight Saving Time (summer time)
function.
To check the current time while listening to a
broadcast
Press DSPL/BACK (or DSPL on the remote) until the “ INFO ” and “ TIME ”
display appears. See “Checking the Tuned Channel Information”.
To cancel a selection
Press DSPL/BACK (or BACK on the remote) to return to the previous
display during menu operation.
Press MENU on the remote commander to exit the menu display. The
display returns to the tuned channel display.
Playing the Receiver
Notes
• Turn down the volume of the component connected to the unit before
playing the unit.
• Adjust the volume of the component connected to the unit.
• If sound distortion occurs when playing the unit with the cassette
adaptor, adjust the Line Out Level. See “Using Other Functions”.
Manual Tuning
1 Make settings on your car audio or amplifier, etc. so that you
can listen to the sound from this unit.
2 Press POWER to turn on the main unit.
The channel that you last tuned in to is displayed.
CH13
TOP 20 XM
CHAN
3 Turn JOG roller (or press X ⁄ x on the remote) to select
desired channel.
• Holding down X ⁄ x makes the channel readout to rapidly increase or
decrease respectively.
• This unit has two scroll modes: Channel Scroll and Category Scroll. See
“Using the Category Scrolls”.
Channel Scroll: searches for a channel by scrolling every single channel
among authorized channels.
Category Scroll: searches for a channel using the Channel Category you
selected in the menu display.
To turn off the receiver
Press POWER.
Using the Category Scrolls
In Category Scroll mode, you can search for a channel among authorized
channels that have the corresponding Channel Category you selected in
the menu display.
1 Press JOG roller (or MENU on the remote) to show the
menu display.
“SCROLL MODE” appears in the display.
2 Press JOG roller (or MENU on the remote).
The current scroll mode appears in the display.
SCROLL MODE
CHANNEL SCROLL MENU
3 Turn JOG roller (or press X ⁄ x on the remote) to select
“CATEGORY SCROLL” and press JOG roller (or ENTER on
the remote).
The selected Channel Category appears in the display.
CATEGORY SCROLL
NEWS MENU
4 Turn JOG roller (or press X ⁄ x on the remote) to select the
desired Channel Category and press JOG roller (or ENTER
on the remote).
The unit searches for a channel that has the selected Channel Category
from the Channel Number next to the current channel.
The CATEGORY indicator appears in the upper left corner of the
display.
To cancel a selection
Press DSPL/BACK (or BACK on the remote) to return to the previous
display during menu operation.
Press MENU on the remote commander to exit the menu display. The
display returns to the tuned channel display.
Tips
• When you tune in to a channel in Category Scroll mode, the Channel
Category appears for about 2 seconds in the display.
CH50
News XM
CAT
• When there is no channel that has the specified Channel Category,
“--------” is displayed.
Note
When the Category list cannot be received depending on the receiving
condition, “--------” is displayed in step 3 above, and you cannot select the
Channel Category.
Presetting your Favorite
Channels
Preset Tuning
You can preset up to 5 channels onto the preset buttons (1–5). To access
the preset channels, simply press the corresponding preset buttons (1–5).
All the preset buttons are preset to Channel Number 1 at the factory.
Presetting a channel
1
Follow steps 1 to 3 in “Playing the Receiver”, and manually
tune in to the channel you wish to preset.
2 Hold down the preset button on the unit for more than 2
seconds.
The preset number appears.
CH50 PRESET1
Financial News XM
CHAN
The previous preset channel is deleted and the unit presets the
channel being received.
Note
You cannot preset channels using the remote.
Tuning in to a preset channel
1
Press POWER to turn on the main unit.
2 Press the desired preset button (1–5).
Channel Name
Channel Number
Checking the Tuned Channel
Information
This unit has three display modes in the tuned channel display.
1 Press DSPL/BACK (or DSPL on the remote).
The display mode changes as follows:
CH13
TOP 20
Maria
Christmas Song
Concert starts
11:00AM 12/24/01
XM
CHAN
NAME
TITLE
INFO
TIME
Tips
• When the Additional Information text has more than 16 characters, text
will be scrolled every 2 seconds.
After all Additional Information is displayed, “--- + --- + --- + --- +”
appears for about 2 seconds and then repeats displaying from the
beginning.
• As the unit memorizes the display mode when the power is turned off,
the display appears in the last display mode when you turn on the unit.
Note
If the channel has no text information, “--------” will appear in the display.
Storing the Information
You can store the text information contained in the tuned-in channel. This
unit can store ten sets of the following information:
– Channel Number
– Channel Name
– Artist Name or Feature
– Song or Program Title
– Additional Information and time/date
Note
When you store the eleventh set of information, the oldest one will be
deleted.
1 Press MEMO when the channel you wish to store the
information is received.
“MEMORIZED” appears for about 2 seconds and the information is
stored in “MEMO 1”.
The memory numbers of already stored information increases by one.
MEMORIZED
Viewing the stored information
1
Press JOG roller (or MENU on the remote) to show the
menu display.
2 Turn JOG roller (or press X ⁄ x on the remote) to select
“MEMO” and press JOG roller (or ENTER on the remote).
MEMO
MEMO 1 MENU
If no information is stored, “NO MEMO” will appear.
3 Turn JOG roller (or press X ⁄ x on the remote) to select the
desired memory number and press JOG roller (or ENTER
on the remote).
4 Turn JOG roller (or press X ⁄ x on the remote) to scroll the
stored text information.
The information appears in the following order: Artist Name/Feature
t Song/Program Title t Additional Information t Channel
Number
t Channel Name t Time and date.
To return to the display for selecting the
memory number
Press DSPL/BACK (or BACK on the remote).
To exit the menu display
Press MENU on the remote commander. The display returns to the tuned
channel display.
Using other Functions
You can also use the following functions in the menu display.
Menu See
Scroll mode “Using the Category Scroll”
Memo “Storing the Information”
Back Light below
Beep below
Time Adjust “Adjusting the Time Difference”
Contrast below
Auto Power Down below
Line Out Level below
To cancel a selection
Press DSPL/BACK (or BACK on the remote) to return to the previous
display.
Press MENU on the remote commander to exit the menu display.
Note
When no operation is performed for about 1 minute in the menu display,
the unit cancels a selection and the display returns to the tuned channel
display.
Back Light
You can select the lighting level of the display window. The factory-set is
“BRIGHT”.
1 Press JOG roller (or MENU on the remote) to show the
menu display.
2 Turn JOG roller (or press X ⁄ x on the remote) to select
“BACK LIGHT” and press JOG roller (or ENTER on the
remote).
The current setting appears in the display.
BACK LIGHT
BRIGHT MENU
3 Turn JOG roller (or press X ⁄ x on the remote) to select the
desired setting and press JOG roller (or ENTER on the
remote).
BRIGHT: makes the display window bright.
DIM: makes the display window dim.
OFF: turns off the lighting of the display window.
Beep
You can turn the beep on or off. The factory-set is “ON”.
1 Press JOG roller (or MENU on the remote) to show the
menu display.
2 Turn JOG roller (or press X ⁄ x on the remote) to select
“BEEP” and press JOG roller (or ENTER on the remote).
The current setting appears in the display.
BEEP
ON MENU
3 Turn JOG roller (or press X ⁄ x on the remote) to select
“ON” or “OFF” and press JOG roller (or ENTER on the
remote).
Contrast
You can adjust the contrast of the display window in 8 levels. The factory-
set is level 4.
1 Press JOG roller (or MENU on the remote) to show the
menu display.
2 Turn JOG roller (or press X ⁄ x on the remote) to select
“CONTRAST” and press JOG roller (or ENTER on the
remote).
The current setting appears in the display.
CONTRAST
L H MENU
3 Turn JOG roller (or press X ⁄ x on the remote) to adjust
contrast while checking the display and press JOG roller (or
ENTER on the remote).
Auto Power Down
Auto Power Down function automatically turns off the unit when the
specified time passes from the last button operation. The factory-set is “60
min”.
1 Press JOG roller (or MENU on the remote) to show the
menu display.
2 Turn JOG roller (or press X ⁄ x on the remote) to select
“AUTO POWER DOWN” and press JOG roller (or ENTER
on the remote).
The current setting appears in the display.
AUTO POWER DOWN
60min MENU
3 Turn JOG roller (or press X ⁄ x on the remote) to select
setting and press JOG roller (or ENTER on the remote).
The setting changes as follows:
OFF 60 min 120 min 180 min
When you select a setting other than “OFF”, the Auto Power Down
indicator appears in the lower left corner of the display. To disable the
Auto Power Down function, select “OFF.”
When the specified time passes, the following messages appear in the
display.
POWERING DOWN
NO POWER DOWN?
PRESS ANY KEY
When no button is pressed, the unit turns off the power. If you press
any button, the timer duration will begin from the start.
Line Out Level
You can adjust the output level of the signal from the LINE OUT jack in 8
levels. The factory-set is level 8 (Maximum.).
Standard level adjustment
• When the car connecting pack is connected to the LINE OUT jack of the
unit and using it in a car, turn down the Line Out Level to avoid sound
distortion.
• When the car connecting pack is not connected to the LINE OUT jack,
set the Line Out Level to the maximum level.
1 Press JOG roller (or MENU on the remote) to show the
menu display.
2 Turn JOG roller (or press X ⁄ x on the remote) to select
“LINE OUT LEVEL” and press JOG roller (or ENTER on the
remote).
The current setting appears in the display.
LINE OUT LEVEL MENU
3 Turn JOG roller (or press X ⁄ x on the remote) to adjust the
Line Out Level while listening to the radio and press JOG
roller (or ENTER on the remote).
1
DSPL
BACK
MEMO
MENU
ENTER
2 3
4 5
POWER
*
*